Help me unfuck my ibanez..
Help me unfuck my ibanez..
soo... ever since i put new strings on... i don't like how my ibanez feels... the strings feel good.. but the setup is whacked... they sound really rattlely and just.. not good...maybe its the action? i like it low, so i lowered the strings to where you could fit like a credit card through.. but that just made em more rattlely... and i have no idea what the knobs do on it.. so i can't mess with the sound... rather, i don't know which knob is which.. i know the volume one... but one the other two is tone.. and the other i dunno.. the only reason i'm playing the ibanez is because i'm on a wooten kick thanks to mike and i can't slap my fretless.
Andrew
- Bartender2424
- DMBTabs.com Council
- Posts: 893
- Joined: Mon Aug 04, 2003 5:01 pm
- Location: West Haven, Connecticut
- Contact:
-
- Posts: 170
- Joined: Sun Feb 15, 2004 4:35 pm
- Location: Kansas City
If I'm understanding you correctly, your strings are set waaaaaaaayy too low. The lower your action, the more rattles and buzzing you will get. The quality of the neck, material it is made of, and fretwork also are a factor.
This link provides a good guide to setting up your bass: http://www.mrgearhead.com/faq/basssetup.html
Yes, it is geared toward Fenders, but it is still a good place to start. Keeping in mind that the dimensions they give are only intended to be a starting point that you would tweak to suit your playing style, it says the distance from the top of the 17th fret to the bottom of the string should be in the 5/64-7/64 of an inch range (just under 1/8 of an inch). For me, even that feels low. I also like a bit more relief in the neck (set by the truss rod).
If you don't know what any of this shit means, take it to a music store and ask for a full setup (truss rod, intonation, action). If you're slapping, tell them that you want a low setup geared toward slapping (it will probably end up around the dimensions on the page I linked to).
Nothing is more discouraging than a poorly setup bass. And on the same note, I took a cheapo SX bass, gave it a good setup, and it actually felt and played pretty nicely. A good setup is even more important than how much your bass costs.
This link provides a good guide to setting up your bass: http://www.mrgearhead.com/faq/basssetup.html
Yes, it is geared toward Fenders, but it is still a good place to start. Keeping in mind that the dimensions they give are only intended to be a starting point that you would tweak to suit your playing style, it says the distance from the top of the 17th fret to the bottom of the string should be in the 5/64-7/64 of an inch range (just under 1/8 of an inch). For me, even that feels low. I also like a bit more relief in the neck (set by the truss rod).
If you don't know what any of this shit means, take it to a music store and ask for a full setup (truss rod, intonation, action). If you're slapping, tell them that you want a low setup geared toward slapping (it will probably end up around the dimensions on the page I linked to).
Nothing is more discouraging than a poorly setup bass. And on the same note, I took a cheapo SX bass, gave it a good setup, and it actually felt and played pretty nicely. A good setup is even more important than how much your bass costs.
-
- Posts: 170
- Joined: Sun Feb 15, 2004 4:35 pm
- Location: Kansas City
Who is online
Users browsing this forum: No registered users and 72 guests