Show us your Studio/Recording Equipment

GreyBlueAnt · Unread post by **GreyBlueAnt** » Fri Dec 30, 2005 1:07 pm

here's what i'm using today. could very well change tomorrow. i don't keep stuff for very long.

thejoe · Unread post by **thejoe** » Fri Dec 30, 2005 5:42 pm

how do you like that line 6 interface thing?

Coldchillin · Unread post by **Coldchillin** » Sat Dec 31, 2005 12:50 am

GreyBlueAnt wrote:here's what i'm using today. could very well change tomorrow. i don't keep stuff for very long.

What do you mount your condenser mic on? Just a normal mic stand? I don't have mine because I left it at my friend's house so I don't know if I can use it or not.

Kahn · Unread post by **Kahn** » Sat Dec 31, 2005 3:09 am

It looks like that will mount on a normal mic stand

sunglassesatnight · Unread post by **sunglassesatnight** » Sat Dec 31, 2005 7:18 am

My condensor works on a normal stand.

Coldchillin · Unread post by **Coldchillin** » Sat Dec 31, 2005 10:52 am

Thank you all!

GreedylilPig · Unread post by **GreedylilPig** » Tue Jan 03, 2006 1:38 pm

Here's what I use. Fairly inexpensive, and I'm pretty satisfied with the result.

This is my 4-track. I bought it years ago, it wasn't that expensive then (maybe $100 or so). They're probably much cheaper now. It's a Yamaha MT-50, very easy to work with.

I bought a 1/4" inch to 1/8" adapter so I could send the recording to my computer.

to:

My microphone is a E/V N/D267. I bought it several years ago before I started playing gigs. It was about $125 then and again, probably much cheaper now.

The guitar I use the most to record has the following pickup. I am not sure what the specific model Fishman pickup it is:

I use Sony Acid Pro 4.0 to record. It's about a $400 program. I really like it.

Basic screen shot. Sorry for the horrible jpeg quality.

In terms of effects, I usually use two, reverb and smooth/enhance.

First is a little bit of reverb. There's many different modes to choose from. My favorites are "warm space" and "rich hall." I usually set the reverb between -35 and -30 db, near the minimum amount. I'm careful with it because I think too much reverb is really, really annoying.

And last, I enhance the track a little, around level 3.

Coldchillin · Unread post by **Coldchillin** » Fri Jan 06, 2006 5:53 pm

slimerdmb24 wrote:My condensor works on a normal stand.

How do I load it onto there?

sunglassesatnight · Unread post by **sunglassesatnight** » Fri Jan 06, 2006 10:20 pm

1. Screw the shockmount (spider webby thing) on to the 5/8" bolt coming out of the top.
2. Squeeze the handles on the shockmount, slide in mic.
3. Rock

JCork · Unread post by **JCork** » Mon Jan 09, 2006 9:19 am

I have a mackie dfx-12 track mixer running through an m-audio Pre-USB box into my custom computer that was built for me by a friend. Its a pretty sick set up, imo.

HooKeD · Unread post by **HooKeD** » Thu Jan 12, 2006 2:31 am

I use a Digidesign 002, with some mics I'm not too proud of, an akg CS 2000,

, and my Martin 000CE.

DMBTabs.com

Show us your Studio/Recording Equipment

~

Who is online