please help:dead frets
-
- DMBTabs.com Regular
- Posts: 240
- Joined: Wed Oct 08, 2003 6:34 pm
- Location: minnesota
- Contact:
please help:dead frets
hey kids, i have a problem and i was wondering if anyone knew the reasoning behind my 3 dead frets and constant buzzing of the low E string when played open. I didnt have this problem before and i recently just got my action on my guitar lowered so i was thinking that was the reason. the fret is 13 and the strings are A,D, and G. For example how would i fix this? is it fixable? , and what the reason for the buzzing on the low E when played open. If u any ideas at all please let me know. thanks a lot guys.
peace
peace
sounds like you answered your own question. the action is just too low.
sight down the neck and make sure it is reasonably straight and if anything bends forward toward the front of the guitar. if that's in order then i can safely say that i think the action got set too low. bring it back and make the guitar tech fix it right.
sight down the neck and make sure it is reasonably straight and if anything bends forward toward the front of the guitar. if that's in order then i can safely say that i think the action got set too low. bring it back and make the guitar tech fix it right.
This is going to be hard to explain but I'll give it a shot.
If the saddle is shaved too thin, the low e string may have a hard time making full contact with it therefore causing a buzz. The low e string, being bulky, can't make a sharp turn coming out of the bridge and up towards the neck...so it comes out in a more of an ark shape which makes the string a little higher at the saddle than the others.
I've had this problem before, and it was particularly noticable just after I changed strings....the way I solved it was to take a flat screwdriver and press down on the low e string between the saddle and the hole where the string goes into the bridge...this effectively bends the string at that "arc point" and allows the string to fully contact the saddle.
Whew!! that was tough. Hope you can make sense of it.
My advice is to take the guitar to a DIFFERENT person than the one that lowered the action, because that person should have checked out the guitar to make sure everything worked properly after the action was lowered. Setting up a guitar is a lot more than just shaving the saddle. The neck needs to be properly adjusted as well.
I may be wrong, but I bet its not the fretwire that is your problem.
If the saddle is shaved too thin, the low e string may have a hard time making full contact with it therefore causing a buzz. The low e string, being bulky, can't make a sharp turn coming out of the bridge and up towards the neck...so it comes out in a more of an ark shape which makes the string a little higher at the saddle than the others.
I've had this problem before, and it was particularly noticable just after I changed strings....the way I solved it was to take a flat screwdriver and press down on the low e string between the saddle and the hole where the string goes into the bridge...this effectively bends the string at that "arc point" and allows the string to fully contact the saddle.
Whew!! that was tough. Hope you can make sense of it.
My advice is to take the guitar to a DIFFERENT person than the one that lowered the action, because that person should have checked out the guitar to make sure everything worked properly after the action was lowered. Setting up a guitar is a lot more than just shaving the saddle. The neck needs to be properly adjusted as well.
I may be wrong, but I bet its not the fretwire that is your problem.
-
- DMBTabs.com Regular
- Posts: 240
- Joined: Wed Oct 08, 2003 6:34 pm
- Location: minnesota
- Contact:

Take it to a shop....a different shop. They will evaluate whats wrong. It does not cost that much to have your neck adjusted and action set (in your case you might have to replace the saddle so it may mean slightly more $$ but still should be reasonable). I'm guessing $30 to $60...but thats just a guess. It could be more if it turns out to be something more serious.
They can pop a few new frets in there as well, pretty easily, but I don't think the frets are the problem...how old is your guitar?
-
- DMBTabs.com Regular
- Posts: 240
- Joined: Wed Oct 08, 2003 6:34 pm
- Location: minnesota
- Contact:
-
- DMBTabs.com Regular
- Posts: 240
- Joined: Wed Oct 08, 2003 6:34 pm
- Location: minnesota
- Contact:
Return to “General Guitar Discussion”
Who is online
Users browsing this forum: No registered users and 100 guests